The machine is not dispensing any water

• Please check the power to the machine is on and that the lead is fully fitted into the back of the machine (See images for reference).
• Check the water supply is turned on at the isolation tap to the rear of the machine (the tap must be in line with the pipework to be turned on, please see image.)
• Check the water supply is turned on at the isolation tap on the install rail (the tap must be in line with the pipework to be turned on, please see images). 
• Reset the waterblock on the install rail by holding down the red reset lever for 10 seconds (See images for reference).

If these solutions do not remedy the problem, please contact our service centre.